Description

Ball-shaped sanding head with a fine surface. It has a convex side, so even though it is fine, it is still able to remove more material compared to a straight-sided head of the same strength. Since it is finely notched, it does not run into the material easily. Its tapering tip and round nose make it possible to sand along the skin. It is recommended to use when filling modern gel nail polish , or in the case of artificial nails, along the edges, to remove air , if someone cannot handle a stronger head properly. It can be used by both right- and left-handed people. The cooling of the head is excellent, with proper use it does not heat up.

The correct procedure for disinfecting metal tools:

Clean the metal tool from organic contamination (dust, pieces of leather, etc.). You can clean it manually under lukewarm running water with a nail brush or with Crystal Nails XtremePRO Ultrasonic Cleaner .
Wipe the device dry.
Spray the device with a device disinfectant, CrystalSept Alcoholic Device and Surface Disinfectant can be used for this purpose . The disinfectant should apply to all used surfaces of the device. Wait 1-1.5 minutes, this is the time required for the disinfectant to take effect.
Thoroughly rinse the disinfectant off the metal tool with running water.
Wipe the device dry and put it in its storage place.
Never allow the disinfectant or water to dry on the device, as this may damage the quality of the device.

Attention! Never spray the hand unit of sanders with disinfectant, because it causes the hand unit to malfunction, which is not covered by the warranty. You can find the correct cleaning of sanding machines in the user manual supplied with the machine.